WIND RESISTANT SWING DOOR OPERATOR, HOLD ELECTRIC STRIKES AGAINST STRONG WIND;
UNLOCK THE ELECTRIC STIKE BEFORE OPENING THE DOOR EVEN WITH THE BLOWING OF BIG WIND;
LOCK THE ELECTRIC STRIKE AFTER CLOSING ALTHOUGH WITH THE AFFECTS OF BIG WIND;
SUITABLE FOR DISABLED PEOPLE LIVING IN NORTH WINTER.
It is the ideal swing door operator for applications that need reliable, durable entrances with the strength to withstand continuous usage. It is easy and convenient for you to install it and adjust the running parameters. The swing door operator suits both left and right hand doors, supports building intercom system, access control system, wall switch, motion sensor, electric lock and remote controls. Swing door operators from SAFEDOOR therefore satisfy a broad range of demands. It is beneficial for any commercial, civil or public environment, bestowing any manual door with the complete, effortless convenience of an automatic door.
Art.1092.1820
Features:
* DC three- phase brushless motor, intelligent over-heat, over-voltage protection
* Push & go function allow pedestrian to push the door roughly, no damage, no malfunction
* Running parameters can be easily adjusted by the built-in control panel with LCD screen
Electromechanical gear reducer, cost-save than the hydraulic models
* Motor driving open & close automatically
* Easy installation, articulated arm, sliding arm & track both available, can be mounted on hinge side and opposite hinge side
* One model suit both left and right hand doors, support building intercom system, access control system, wall switch, motion sensor, electric lock and remote controls
* With fire alarm linkage function, can be applied to the fire control door.
* Suitable for residential doors, meeting room door, public service area, entrance of the administrative institution, washroom, passageway door, supermarket, shop and so on
Technical parameter: ★Standard
Specifications |
Wind Swing
1092.1820 |
Door width(max) inch (mm) |
47'' (1200) |
Door weight(max) lbs.(kg) |
220 (100) |
Product dimensions inch (mm) |
22.8'' x 3.1" x3.5"
(580 x 80 x 90) |
Product weight (kg) |
6 |
Output torque (N.m) |
75 |
Power consumption(W) |
45 |
Power standby (W) |
<2 |
Power Required(VAC, Hz) |
110/220, 50/ 60 |
Rated current (A) |
<1 |
Power Output(max)(VDC mA) |
12, 500 |
Shaft opening angle(°) |
45-180 |
Opening/closing time(sec.) |
3-8 |
Hold-open time(sec.) |
0-99 |
Ambient temperature (C) |
-40-+85 |
Protection class |
IP54 |
Compression force on the door |
0-10 |
Left/ right hand setting |
0/1 |
Push & Go function |
★ |
Protection against obstruction |
★- |