Infrared motion sensor
Art.No FLY
The FLY is a Infrared motion sensor with precision optics and digital signal processing.Passive infrared motion sensor allowing the opening of small pedestrian doors with easy adjustment of the detection zone. Its small size makes it possible to conceal it completely inside a door profile. The FLY can also be integrated into a cover allowing surface mounting.
Features:
Detection
1.Very high accurracy of the detection zone.
2.Homogeneous lobe independent of the external temperature conditions,detection guaranteed even when the background temperature is close to that of the human body.
3.Insensitive to air currents and any sudden temperature variation.
4.Detection zone can be adjusted accurately by means of a masking lens
5. Insensitive to external interference such as rain, snow, etc..
6.Very fast response time.
7. Low thermal remanence of the Pyro element sensor after detection(no memory effect)
Technology
1.Electronics controlled by a microprocessor that,through a digital treatment, provides an optimal sensitivity an efficient thermal compensation as well as a high immunity against interference.
2 Precision optics perfectly delimiting the detection zone and increasing the sensitivity of the sensor.
3.P.I.R. sensor with four independent zones which gives an identical sensitivity in all directions.
4. Enhanced immunity against vibrations. Thanks to the use of a pyroelectric sensor from the last generation, the FLY is also immune to GSM interference.
5. Injected lens which offers better mechanical resistance to vandalism.
6.Adjustments for universal use :Adjustment of the size of the detection zone is carried out by cutting out segments of the masking lens. Electronic adjustments are performed by means of DIP switches.
Style
1.The miniaturized size of the FLY offers a minimal visual impact and allows easy mounting,in cramped places.Its robustness gives it vandal-proof protection.
2.The FLY becomes even more unobtrusive when mounting in the ceiling in its FLYUP version using its FCA accessory.
3.Integrated in its FSA accessory for which the keywords are aestheticism and impermeability, and surface mounted, the FLYCATCHER created in this way will appeal to the most demanding architects.
| Technical data: |
| Model |
FLY |
| Technology |
passive infrared with microprocessor |
| Mounting height-variable |
max 2.5 m x 1.5 for a mounting
height of 2.2 m |
| Maximum mounting height |
3m |
| Power supply |
12-24 V AC (50/60 Hz) 10/+10 %
12-24 V DC-10/+30 % |
| Power consumption |
< 10 mA (20 mA if the output relay is activated) |
| Output relay |
potential free contact NO/NC
1 A/75V DC OR 50V AC |
| Warm up time |
10s |
| Relay hold time |
0.5s or 2s |
| Response time |
max 200 ms |
| Detection speed |
0.1 to 1.5 m/s |
| Dip-switches adjustments |
sensitivity: ON = high- OFF= low
relay working mode: ON = passive- OFF =active
output hold time :ON= 2.0sec -OFF= 0.5sec |
| Optical characteristics |
passive infrared with four elements 15 Fresnel
lenses with full independent masking possibility |
Connection
Cable section (recommended) |
small 5 plug-in contacts connector
0.2 to 0.5 mm |
| Light indicator |
1 red LED |
| Operating temperature |
-30ºC to +55ºC |
| Weight |
40g |
| Dimensions |
101mm(L)x46mm(D)x27mm(H) |
| Colour |
anthracite grey or white |
| Immunity |
immune to electrical and radio frequency interference according to EC 89336/CEE and 92/31/CEE |
FCA
Dimensions
Colour |
91 mm (L)x 40 mm (H)
anthracite grey white or alu finishing |
FSA
Dimensions
Colour
Degree of protection |
121 mm (L)x51 mm (H)
gris anthracite,blanc ou alu
IP 54 (UV resistant) |
Audited Supplier 
){kind=link}