2023.101
Contact type signal band
The contact band is made of two conductive silicone elements. They are separated by a certain distance. The tail of the contact band can be connected to different end piece, depending on its use and application. After putting it into the rubber sleeve and connecting it with the switch, all the components form a completer system.
Features:
- Because of different lengths that can be selected, the safety edges can be easily and quickly assembled by users.
- If properly installed, the safety margin won't have the problem of water leakage. As long as the contact band works well, even if the safety margin is damaged, the function is still normal.
- It is mainly used to protect the edges of automatic doors, automatic gates, rolling doors, car doors or industrial machinery and so on. The user must select suitable rubber sleeves according to the strength and speed of the moving part.
Technical parameters:
| Material |
Silicone Rubber |
| Size |
4*7 mm |
| Max. driving force |
5N |
| Driving distance |
1 mm |
| Switching cycle |
>100'000 |
| Max. switching voltage |
24V AC/DC |
| Max. switching current |
10mA |
| Max. contact resistance |
General ≤50 Ohm, Max. 150 Ohm |
| Max. conversion resistance |
150 Ohm (No switching) |
| Working temperature |
-40ºC~+80ºC |
| Min. bending radius (Vertical axis) |
750 mm |
| Min. bending radius (Horizontal axis) |
75 mm |
| Dielectric strength |
1500DV, 1000AC |
Audited Supplier 
){kind=link}
){kind=link}