This heavy duty swing gate opener set has got 220V or 120V AC motors, with big and strong force to resist against the big wind, and can be frequently used without getting hot and stop.It can handle the max gate width 5 meter/wing or max 1000kgs/leaf, and it can be connected with electric lock for home safety and prevents from being blowed by the big hurricane wind for solid gate.
This is a mature product and has been installed and tested in extremely cold countries for more than 12 years. It features the long lifetime, anti-low temperature lubrication, strong motor force, rusty-resistant gear parts, intelligent soft start and soft stop, reverse against obstruction, with connection port for access control, photocell, loop detector and etc.
1022.101 is a very briliant product for home, industrial swing gates.
Features:
*Driven by thread pole
*Mechanical limit switch, the opening angle adjusted inside the motor
*In case of power failure, the gate can be opened and closed manually by release clutch
*The battery can remain on working for 6 hours(DC motor)
*Soft start and stop
Technical parameter:
| Specifications |
1022.101 |
1022.101D |
| Gate width (m) |
2~5 |
| Gate weight (kg) |
400~1000 |
| Power supply(V) |
120/230 AC |
24DC |
| Power(W) |
150 |
| Revolution(rpm) |
1400 |
| Travel time(sec.) |
17 |
| Noise(dB) |
≤56 |
| Water proof(IP) |
44 |
| Environment temperature(ºC) |
-45~+65 |
Standard accessories:
Remote controls: 433.92Mhz rolling code remote transmitter, 100m remote distance in open space
Control box: It has got full power start or soft start and soft end function. For very big gate, we can set full power start; For normal size gates, we can set soft start and end to protect the gate and gate motor.
Optional accessories:
Photobeam sensor 2062.107A: When the gate is closing, anything interrupts the photocell emitter and receiver, the gate will return to open and remain in open until the obstacles move way. This is to protect people and property from injuring from the automatic closing gates
Wireless keypad RT-KP1: Input the password, the keypad will send the radio out, when the receiver on the control panel received this radio signal, the gate will open. No need to take the remote control in hand
LED alarm lamp: It has got 220V, 110V and 24V type. When the gate is moving, the control panel will assign electricity to flash light to blink and flash, which is to remind people to pay attention to the moving gates.
Electric lock 3023.001: Gate stopper installed on the ground, and lock body fixed at the bottom of gate wing. When gates closed and reaches the stopper, the lock bolt will drop into the lock hole. Its fail safe model. When the power is cut, the lock will remain locked. This will help the gate resist the big wind or prevent theft attempts from opening the gate from outside.
Audited Supplier 
){kind=link}
){kind=link}