RC-518 Automatic Door Vehicle Smart RFID Tag
This vehicle smart USB tag shares similar function as the remote control for automatic door & automatic gate.
The receiver is connected into the automatic gate operator controller, and user insert the vehicle tag into the car's USB interface. When the car reaches the 10 meters from the gate, the receiver will detect the RFID tag, and it will send the START signal to automatic gate to open the gate automatically. When the car pass the gate, the gate opener will automatically close. It brings convenience for the user to drive a car without stop before the gate.
Features:
* Advanced software algorithm, strong anti-interference ability
* The response distance is adjustable in three gears, making it more flexible to use
* Receiver with wide voltage input design, 12~30V DC power input
* Unique frequency hopping technology, and high wireless transceiver stability
Technical parameters:
| Receiver: |
| Power supply |
DC12-30V |
| Static current |
34mA (DC12V power supply) |
| Dynamic current |
62mA (DC12V power supply) |
| Dimension |
110mm (L) × 30mm (W) × 15mm (H) |
| Vehicle tag: |
| Power supply |
5V (USB interface) |
| Operating current |
12mA |
| Launch distance |
Three gears adjustable |
| Dimension |
56mm (L) × 38mm (W) ×12mm (H) |
User guide:
1. The receiver learns the vehicle tag ID(The vehicle tag and receiver pairing)
Please press the learning button of the receiver for about 1s first, the blue indicator light of the receiver will light up;when the tag is powerd on, shortly press the vehicle tag button, and the blue indicator light of the receiver flashes
2. Adjust the response distance between the vehicle tag and the receiver
The response distance of the vehicle tag and the receiver can be divided into three levels: far, medium and near.(The actual response distance will be affected by the use and installation environment.)
3. Enter the vehicle tag response distance adjustment mode
Please press the vehicle tag button for about 3s, the indicator light will light up, then relase the button,the indicator light will always turn on to enter the response distance adjustment mode.
4. Adjust the response distance
In the response distance adjustment mode, shortly press the button to adjust and turn the response distance to far,middle and near. Specific as the indicator shows: As a period of 2s, the indicator light flashes once for near range, flashes twice for medium range, flashes three times for far range.
5. Exit the vehicle tag response distance adjustment mode
a. Please press the vehicle tag button for about 3s, after the indicator light goes out, loose the button and then will exit this mode.
b.Without any operation, wait for 10s to automatically exit this mode.
6. Open the door manually
When approaching the receiver but the receiver has not responded to the transmitting tag, shortly press the vehical tag button, then the door can be opened immediately.
7. Delete the matching vehicle tag ID in the receiver(remove pairs between vehicle tag and receiver)
Press and hold the learning button of the receiver for about 5 seconds, and the blue indicator light of the receiver flashes quickly, then delete all vehicle tag IDs. Please note the ID can not be deleted individually.
Audited Supplier 
){kind=link}