Radar Detector

• Test Distance: 2.0-0.4m
• Working Principle: Microwave Impact
• Operating Temperature Range: -40°C~+80°C
• Technich Type: Microwave
• Transport Package: Carton
• Specification: 5-24V
• Model NO.: 1031. BM06
• Trademark: SAFEDOOR
• Origin: China
• Production Capacity: 10000/Year

Product Description

Radar detector   Art.No 1031.BM06

This is a special radar detector tailored for vehicle parking access control systems. It adopts 60GHZ frequency millimeter-wave radar control chip with 2T4R radar antenna. Through the technical means of distance measurement, speed measurement, and direction identification in the setting area, the anti-fall radar can detect vehicles, non-motorized vehicle and pedestrians, and protect them from being hit by the barrier gate.

Features:
*Various anti-smashing modes: large cars, small cars, motorcycles, electric cars, pedestrians.
*Specific area detection mode: detectable distance 0.1m-20m.
*Special scene customization: distance detection, speed detection, movement detection.
*Support all types of barriers: straight barriers, curved barriers, fence barriers, advertising barriers, airborne barriers.

Technical data:
 

Model	Art.No 1031.BM06
Transmit frequency (GHz)	60G/77-81GHz
Radar antenna (TR)	2T4R
Working voltage (v)	5-24V
Ambient temperature	-40ºC~+80ºC
Power consumption	Less than 1.6W
IP	65
Size (mm)	H112*W82*L24
Debugging method	One-button learning
Horizontal width (m)	Default +- 0.5m (+-1m dial code adjustable)
Vertical width (m)	Default 2.5m (adjustable by dialing 0.5m-6, support customization)
Detection accuracy (m)	0.1m
Response time	20Hz in anti-smashing mode, 50Hz in trigger mode
Output mode	Relay signal, support customization
Signal indicator light	Working indicator light, direction identification indicator light
Use type	Straight arms, fence arms, advertising arms and other barriers
Delay output	1-5 seconds adjustable

TRADITIONAL LOOP DETECTORS:
*High cost during installation to cut and recover the pavement
*High cost of maintenance because loops need to be replaced about every two years
*Many scenes are not suitable to install loops, where heavy-current cables, optical cables, water and gas pipelines are beneath the pavement


TRADITIONAL INFRARED DETECTORS:
*Difficult to install.
*High maintenance cost.
*Damage to the pavement.
*Poor adaptability.
*High false alarm rate.
*It is susceptible to interference, such as dash and falling leaves.
*Infrared detector must be installed in pairs at both sides of the entrance.


RADAR DETECTOR:
*Trigger radar can detect vehicles accurately.
*Side-mounted, highly adaptable and reliable with scene self-learning.
*Based on microwave high-precision positioning technology with lower false alarm rate.
*Anti-fall radar can detect vehicles, non-motorized vehicle and pedestrians, and protect them from being hit by the barrier gate.